Having issues getting the door on your Farberware air fryer to close properly can be frustrating. However, in most cases, troubleshooting the problem is straightforward. Here are some quick tips to help get your air fryer door closing smoothly again.
Check for Obstructions
The most common reason an air fryer door won’t close is because there is some food or other debris stuck in the hinge or between the door and the fryer body. Before closing the door, take a close look at the hinge area and make sure there are no obstructions. Use a damp cloth to wipe away any food bits or oil buildup.
Also check the door seal and the area where the door meets the fryer body. crumbs or drips can get lodged here and prevent the door from sitting flush against the fryer.
Ensure the Basket is Inserted Correctly
Most air fryer models require the basket to be fully inserted into the unit properly for the door to close. Pull the basket out and make sure it is aligned correctly and sitting flat. Then slide it all the way back into the fryer.
If the basket is tilted or not pushed in far enough, it can block the door from closing. Pushing the basket firmly and evenly into place should allow the door to close if this is the culprit.
Troubleshoot Door Alignment Issues
In some cases, the hinge or door frame may have become misaligned, preventing the door from closing securely. If there are no visible obstructions but the door still won’t close, check the following:
- Inspect the hinges to see if they appear bent or warped. Gentle bending may realign them.
- Make sure the door frame is evenly aligned and not crooked.
- See if gently lifting up or pushing down on the door while closing helps it latch into place.
Minor realignment of the door or frame is usually all that’s needed in these situations. As long as the unit still heats up appropriately, a slightly misaligned door will not affect performance once closed.
Adjust the Door Latch
If your model has an adjustable latch, it may just need some tweaking to get the door closing again. To adjust the latch:
- Open the door fully.
- Locate the Phillips head screw on the latch assembly inside the door.
- Turn the screw counterclockwise to loosen the latch.
- Press the door firmly closed and hold in place.
- Turn the screw clockwise gently until you feel resistance and the latch catches into place.
Test opening and closing the door to make sure the latch alignment is correct. You want it to be tight enough to keep the door securely closed, but not so tight that the door does not open and close smoothly.
Inspect the Hinge Spring
Most air fryer doors have a spring mechanism that helps the door close properly. If this spring becomes loose or detached, it could prevent the door from closing.
To check the hinge spring, open the door fully and look at the hinge closely. The spring may be located on the top or side of the hinge. Make sure it is hooked in place properly on both ends and not broken or detached. Close the door and see if the spring is compressing and recoiling appropriately.
If needed, detach the spring and use pliers to squeeze it back into shape. Make sure to reconnect it in the correct position so it can pull the door closed.
Replace Damaged or Worn Out Parts
In rare cases with older air fryer models, worn out door seals, latches or hinges may simply need to be replaced if they are cracked or damaged. Check your air fryer’s warranty and contact Farberware customer service about replacement parts if needed.
Here are some of the main replacement parts that may resolve a door closing issue:
- Door latch assembly
- Door seal/gasket
- Hinges
Installing new high quality replacement parts will often get the door functionality back to normal.
Conclusion
An air fryer door that won’t close properly certainly can be annoying. But in most cases, the fix is quick and simple. Start by checking for food obstructions and door alignment issues. Adjusting the latch or hinge spring can also help get the door closing smoothly again.
If simple troubleshooting does not work, replacing worn parts like the seal or hinges may be needed. With a few troubleshooting steps, you’ll be back to air frying delicious meals in no time.