Quick Answer
Yes, you can mix hydrogen peroxide, baking soda, and Dawn dish soap. This combination makes a DIY cleaning paste that can be used to scrub surfaces in the kitchen and bathroom. The ingredients work together to cut through grime and leave surfaces sparkling clean.
Ingredients in the Mix
Here’s an overview of each ingredient and what it contributes to the cleaning paste:
Hydrogen Peroxide
– Acts as a bleaching agent to whiten and disinfect surfaces
– Helps lift stains
– Breaks down organic material like food, grime, etc.
Baking Soda
– Mildly abrasive to scour surfaces
– Absorbs odors
– Neutralizes acids from grease, hard water, etc.
Dawn Dish Soap
– Cuts through grease and oils
– Sudsy formula helps lift grime
– Typically gentle enough for multiple surfaces
How the Ingredients Work Together
When combined, these three ingredients create a synergistic effect that makes cleaning easier.
The hydrogen peroxide works to bubble away grease and lift stains. Baking soda provides a gentle scouring action to break up grime. Dawn soap penetrates messes and allows the ingredients to spread further.
Together, they can break down food particles, soap scum, hard water stains, mildew, and more. The paste cleans and disinfects in one easy step.
Surfaces to Use It On
This hydrogen peroxide, baking soda, and Dawn cleaning paste can be used on a variety of hard, non-porous surfaces:
Kitchen
– Sinks
– Countertops
– Appliances – exterior of refrigerator, oven, microwave, etc.
– Backsplash
– Floors
– High chairs
Bathroom
– Bathtub and shower
– Sinks
– Toilet bowl
– Tile
– Chrome fixtures
– Mirrors
Other
– Outdoor furniture
– Garbage cans
– Coolers
– Grills
It should not be used on wood, natural stone, or porous surfaces that can absorb ingredients. Test first in an inconspicuous area if unsure about a surface.
How to Mix and Use It
Making and using this cleaning paste is easy:
Mix Together
– 1/2 cup hydrogen peroxide
– 1/4 cup baking soda
– 1 tablespoon Dawn dish soap
Stir until it forms a thick, spreadable paste.
Apply and Scrub
Use a sponge, brush, or rag to spread the paste on the surface you want to clean. Let it sit for 2-5 minutes. Then scrub to break up grime. You can add a little water if needed to make scrubbing easier.
Rinse
Wipe surface with clean wet cloth or rinse thoroughly. The cleaning paste will bubble up as it lifts dirt and stains away.
Tips for Best Results
Follow these tips when using the hydrogen peroxide, baking soda, and Dawn cleaning paste:
– Wear gloves to protect skin
– Spot test on a small area first
– Check that surface can withstand mild scrubbing before applying
– Use paste within 24 hours for maximum strength
– Avoid getting mixture on fabric, carpet, wood, etc.
– Rinse thoroughly after to avoid residue
– Can be stored in sealed container for up to 5 days
Benefits of This DIY Cleaner
Some advantages of using this homemade cleaning paste include:
Natural Ingredients
The ingredients are common household staples that are natural and safe when used properly.
Cuts Grease and Grime
The combination of peroxide, baking soda, and Dawn is highly effective at cleaning stubborn messes.
Disinfects
Hydrogen peroxide has antibacterial properties to sanitize as it cleans.
Affordable
You can make multiple batches using common, inexpensive ingredients.
Customizable
Adjust the ratios to make thicker or thinner depending on your cleaning needs.
Conclusion
Mixing hydrogen peroxide, baking soda, and Dawn makes a DIY paste cleaner that can tackle grease, grime, stains, mildew, and more. It’s safe for use on most hard, non-porous surfaces. Simply stir the ingredients together, apply to the area you want to clean, let sit briefly, and scrub away messes. Rinse thoroughly when finished for a deep clean shine. This is an effective budget-friendly cleaning solution using common household items.